Boating & Yacht Blog

Fiberglass boats are a popular choice among boaters because they’re durable, lightweight, and low maintenance. Despite their popularity, fiberglass boats are still susceptible to getting damaged when you’re out on the water. The good news is they’re relatively easy to repair. Keep reading to learn about the steps on how to fix a fiberglass boat or patch it and what materials you’ll need.

What You Need for A Successful Fiberglass Boat Repair

All you need to perform successful marine fiberglass boat repairs are several basic tools and materials and a few hours of your time. 

Tools & Materials

Thankfully, fiberglass is an easy material to work with. The tools you need to repair a fiberglass boat depend on its size and overall condition. For example, if the hull is damaged, you’ll need a fiberglass repair kit and a resin hardener. If it’s scratched, sandpaper and polish should do the trick. 

Here are ten tools and materials you’ll need to perform any basic fiberglass boat repairs: 

• Soap
• Water
• Plastic bucket
• Sponge or cleaning rag
• Electric sander
• Sandpaper
• Primer 
• Epoxy sealer
• Hardener
• Putty knife

Time 

Just like with the tools and materials you’ll need, the time it takes to repair a fiberglass boat depends on its condition, size, and severity of the damage. While a newer boat can take less than one hour to repair, an older boat may take a few hours to complete. Similarly, the bigger a boat is and the more extensive its damages are, the longer it will take to repair. 

With that in mind, it takes boaters an average of three to six hours to complete fiberglass boat repairs. 

6-Step Guide to Fiberglass Boat Repairs

While repairing a fiberglass boat isn’t particularly difficult, it does require time and effort. Take a look at our step-by-step guide on how to repair your fiberglass boat like a pro: Locate the damaged area, and identify the problem(s). Doing so will help you determine whether you need to repairing fiberglass boat hull, patch your fiberglass boat, perform fiberglass hull gouge repairs, or take other steps to restore your boat to prime condition. 

1. Use gentle soap and warm water to clean the damaged area and the area surrounding it. 
2. Use an electric sander and sandpaper to remove any excess materials or residue on the surface of the damaged area. 
3. Apply a layer of primer to the affected area. The primer layer protects the boat from harmful UV rays, chemicals, and corrosion. It also ensures that your paint job will last for years without fading or chipping.
4. Apply a mixture of epoxy sealer and hardener to the surface of the damaged area.
5. Smooth out the mixture with your finger or a putty knife until it dries completely. 

Congrats! Now you have learned how to repair a fiberglass boat.

Repair Your Fiberglass Boat With CleanTools

Every successful boat repair starts with a clean boat. With over 20 years in the marine industry, CleanTools is your destination for superior boat cleaning supplies, including repairing fiberglass boats, and pontoon boats. Keep your investment in tip-top shape with the Round Boat Brush and The Absorber® XXL . When you want to feel confident in a clean boat, CleanTools has you covered.

Every sailboat owner knows that sails are susceptible to dirt, mildew, and other hard-to-remove stains. It’s the risk you run every time you take your boat out on the water for a day of fun. Thankfully, cleaning the sails of a sailboat is an easy, one-person job that’s relatively inexpensive. Once you know how to clean sailboat sails, you’ll be ready to take on your next weekend's DIY project with confidence. 

If you want to know how to clean sailboat sails, here’s a step-by-step guide we made that will walk you through the process of how you can wash sails.

Boat Sail Cleaning 101

The first thing to keep in mind before cleaning sails is, you really only need to clean the sails when they start to look dirty. You can follow a set cleaning schedule if you want, but you don’t have to. Keep reading to learn about what to avoid, what materials to use, and what steps to take when cleaning your sailboat’s sails. 

Things to Avoid

Harsh sail cleaners, such as bleach and chlorine, are the top products you should avoid when cleaning your boat’s sails. These types of cleaners contain chemicals that strip the sails of their protective resin coating. This stripping weakens the sails over time, meaning you’ll have to pay more money to either repair or replace them down the road. 

Additionally, you should never clean your sailboat’s sails in a washing machine. Doing so will also strip the protective resin coating and likely create tears in the fabric that can’t be fixed. 

Materials to Use

Cleaning boat sails is a relatively inexpensive process because it only requires a few key ingredients: 

• Mild detergent 

• Soft-thistle brush 

• Warm, fresh water 

• Plastic bucket

5-step Method to Clean Sailboat Sails Like a Pro

1. Find a large, open space that has a clean, flat surface where you can stretch out the sails. 

2. Apply mild detergent to the sails.

3. Use a soft-thistle brush to rub in the detergent. 

4. Rinse the sails thoroughly with warm, fresh water until no detergent remains. 

5. To prevent mildew growth, let the sails dry completely before reattaching them to the sailboat. 

Sometimes you’ll need a second line of defense against dirt, mildew, and other stains. Vinegar is a powerful sail cleaning solution that removes pesky stains that get left behind after cleaning with detergent. Simply soak any stain spots in vinegar, then rinse off the vinegar with warm water. Some sailboat owners have found that a combination of detergent and vinegar is most effective among sail cleaning products.

Feel Confident With a Clean Sail on Your Sail Boat

Now that you know how to clean sails on a sailboat, it’s time to invest in the best sail washing products to start washing sails. As the boat cleaning experts, CleanTools manufactures superior boat cleaning supplies—like our Round Boat Brush. This soft-thistle brush is safe for all sail finishes and removes set-in stains without damaging the sail’s material. When you shop this product, you’ll get to enjoy clean sailing from here on out.  Shop Our Cleaning accessories and make cleaning Sails on your sail boat easier than ever before.

When you make a big purchase, you’ll do everything you can to protect that investment. The same can be said about your vessel. If you want to get the most enjoyment out of your boat, you must learn how to take proper care of it. 

Whether you’re a recent boat owner or have been one for years, it’s never too late to learn how to properly detail a boat. Take a look below to find some helpful tips on how to wash and wax your boat like a pro. 

Step-by-Step Guide to Boat Washing 

The best thing you can do to protect your boat from long-term damage is to clean it regularly. It’s not always noticeable, but dirt, grime, and debris collect on your boat’s exterior every time you take it out on the water. Knowing how to wash and wax your boat wherever you are whether in California, West Marine or any part of the world. It’s essential for all boat owners who want to lengthen their boats’ lifespans and keep them looking good as new. 

Check out our six-step guide on how to wash your boat: 

1. Take your boat out of the water and secure it on a trailer, or an elevated, flat surface. 
2. Cover the interior to keep it dry. 
3. 
    
   Give it a thorough pre-rinse to remove surface debris. 
4.  
   Squeeze a layer of boat soap on the exterior. 
5. 
    
   Scrub the soap in with our non-abrasive Wash Mitt  or any non-abrasive tool. Between its ultra absorbency and gentle application, this wash mitt blows competing products out of the water. 
6. Rinse your boat thoroughly with water to remove the soap, and let it dry. If you want to speed up the drying process, The Absorber®  will help you get the job done in no time. This product’s sponge-like pore structure makes it super absorbent, and it’s big enough to cover a larger surface area than standard drying towels. 

How You Can Wax and Buff Like The Pros  

Besides a thorough wash, an effective boat detailing job also includes buffing and waxing. Debris that stays on your boat’s surface causes harmful erosion, and frequent sun exposure dulls the glossy finish over time. If you want to know the best way to wax a boat, and how to properly buff and wax a powerboat to protect it from long-term damage, keep reading. 

Buffing

The purpose of buffing your boat is to smooth over surface scratches. Unlike applying soap to your boat all at once to wash it, you’ll want to apply buffing polish one section at a time. 

Instead of purchasing polish and non-abrasive cloth, get a product that does both—like The Glosser®. This pre-moistened microfiber wipe makes boat detailing faster and easier.  

Waxing

The type of boat you have will determine the type of wax you should use: 

• Sailboats : The large majority of modern sailboats are made of fiberglass. The best wax for cleaning fiberglass boat surfaces is Meguiar’s Marine Pure Wax Carnauba Blend . 

• Motorboats/Powerboats : Motorboats can have anything from a gelcoat to a painted surface. Whatever material of your motorboat’s exterior, the best wax to use is Meguiar’s M6332 Flagship Premium Marine Wax . 

Here’s how to wax your boat in three simple steps: 

1. Apply the wax to your boat’s exterior in sections, like with the buffing polish. 
2. Smooth the wax, with a non-abrasive cloth, in a circular motion. 
3. Let dry then begin to buff again. 

The Buffing Process For Your Boat

To give your boat the sleek finish you want, you need to know how to wax boat with a buffer. Repeat the buffing process that you performed in stage one. This leaves a glossy finish and adds a protective layer to your boat’s exterior. We recommend washing, buffing, and waxing your boat at least once every few months. 

How Much Does It Cost to Wash and Wax a Boat

If you’re wondering how much it costs to wash and wax a boat/powerboat. Whatever size your boat is, whether its a 40 ft powerboat to a small fishing boat, here’s a general breakdown: 

• Boat Soap : $11.99 on Amazon 
• Water Bucket : $10.00 on Amazon 
• Wash Mitt : $10.95 at CleanTools 
• Drying Towel : $34.99 at CleanTools 
• Buffing Polish : $12.65 on Amazon 
• Microfiber Cloth : $9.28 on Amazon 
• Boat Wax : $8.52 on Amazon 

The grand total for these products is $98.38 excluding the tax. This amount may seem a bit pricey just to give your boat a little shine, but trust us, the money you’ll save by avoiding long-term erosion and sun damage. It’ll be well worth it to sustain the life of your boat especially in places that are extremely sunny like California, Arizona or Florida.

Shop Our Products To Help With Waxing and Washing 

Now that you’ve learned how to wash and wax your boat properly, you need the right products to do it. With over 20 years of marine industry experience, CleanTools has everything you need to feel confident with a clean boat all year long. Check out our industry-leading products on our website. Shop Our Products  

If you thought that preserving the brand-new look of your boat was impossible, think again. Ensuring a long life for your boat paint job is much easier than it sounds. With a little TLC, the right paint job will hold up for years to come. 

Choose the Right Paint For The Job

Simple boat paint jobs are the best ones. The first—and easiest—way to keep your boat’s paint job looking fresh is to choose the right paint for the job. While the cost of painting the boat with a durable product to paint your boat with might seem steep at first, we guarantee that it will a.) protect the body of your boat and b.) help you avoid having to repaint your boat every few years. These two factors will save you money in the long run by extending the life of your boat and its paint job. 

Keep reading to learn about the different types of paint you can use for your boat. 

Gelcoat

Painting your boat with gelcoat will give it a shiny finish. To maintain the shine, you’ll need to apply a seal regularly to protect the paint layers from dirt and other contaminants. 

LP (linear polyurethane)

LP paint leaves a shinier finish on your boat than gelcoat paint does. It gives your boat the shiny look you dream about. A paint job done with this product can last over ten years while requiring a minimal amount of maintenance. 

Awlgrip

Awlgrip is a polyester-based, high-gloss topcoat paint that helps protect your boat’s color by sealing in the paint. It’s a top-rated paint brand in the boating industry. The cost to paint a boat with awlgrip will be a little higher than other paint types, but it’s known to last longer than other paint jobs. 

Maintaining the Paint Job For A Long Time

You’re not quite done after applying layers of paint to your boat. You also need to maintain the paint job to make sure it lasts a long time. We recommend using mild cleaners—such as Windex or a vinegar and water mixture—to remove contaminants from your boat’s surface without stripping the paint’s protective layer. 

Remember to wash your boat regularly with water and a detergent that’s designed specifically to clean painted surfaces. When washing your boat, be sure to use soft water. The abundance of minerals in hard water can strip away the paint. We recommend using a gentle wash mitt to wash and The Absorber® to dry. These two products paired together will leave your boat looking good as new. 

To add an extra layer of protection to your boat’s paint job, apply a sealer. This element will repel dirt and keep UV rays from fading the paint color. 

Polishing/Waxing your Boat

You shouldn’t polish your boat for the first few to several years of using it because doing so could strip your boat’s paint job of the protective seal that helps it last a long time. Here's our step by step method after that time is up how to wash and wax your boat. After those first years, though, giving your boat a good polish will keep the surface smooth and shiny for years down the road. 

How to Paint the Hull of a Fiberglass Boat

Start by removing the current layer of paint from the hull of your fiberglass boat, and sand it down. These small steps will give you a smooth, clean surface to work with. Wash the surface with soap and fresh, soft water, then let it dry. Apply a layer of your desired paint, and let it dry thoroughly. Once the paint dries, apply a layer of sealer to protect the paint from smudging or getting damaged by dirt and other materials. 

Shop Our Boat Cleaning Products 

CleanTools has the products you need to give your boat a thorough wash and dry before applying layers of paint and sealer. Whether you need a high-quality wash mitt or a super absorbent drying towel, we have what you need. If you have more questions about how to preserve your boat’s paint job, our boat experts are happy to help. 

Nothing is better than relaxing on a boat during spring and summer months: the warm sun on your skin, spending time with loved ones, and casting away your cares. But that boating bliss can’t happen without a little bit of work. In order to enjoy a functioning boat in the spring and summer, it’s crucial to maintain it during the cold winter months. Keep reading to learn about what it means to winterize a boat and how to do it effectively. 

What Does Winterizing a Boat Mean? 

Winterizing your boat is the process of preparing it to endure harsh winter conditions. Keep reading to see here the steps to winterize a boat.

Winterize Your Boat in 3 Easy Steps

Check out our three-step guide to winterizing a boat: 

1. How to Winterize Your Boat Motor

The winterization process differs slightly depending on what type of motor your boat has, but the following steps generally apply to any motor type:

• Drain any excess water, including the freshwater supply.
• Add a coat of corrosion protection to the motor. 
• Pour in a fuel-stabilizing additive.

2. How to Winterize Your Boat Trailer Wheels

If boat trailer wheels aren’t maintained properly, they’ll deteriorate over time and need to be replaced frequently. Here are some easy steps to protect them from winter damage:

• Store your boat trailer in an enclosed storage unit to protect it from low temperatures.
• Wash the tires and wheels thoroughly, then apply a protective coating to shield them from outside conditions. 
• Cover your boat trailer wheels with tire and wheel covers. These covers act as an additional protective barrier. 
• Elevate the tires to protect them from excess pressure that could deform them over time. 
• Move your trailer every once in a while—if you don’t elevate the tires—to protect them from experiencing excess pressure in one spot all winter. 
• Add some extra air to the tires before storing your trailer for the winter to slow the natural air loss. 
• Remove any heavy items from the trailer to prevent excess weight from putting too much pressure on the tires. 
• If you’ll be storing your boat trailer past the winter months, consider removing the tires and wheels completely and storing them separately. 

3. Additional Steps in the Winterization Process

Follow these additional steps, and your boat will be ready for winter: 

• Replace fuel filters.
• Pour antifreeze into the plumbing system to avoid frozen pipes.
• Remove drain plugs. 

How to Winterize Different Boat Types

The type of boat you have determines how you need to winterize it successfully. Take a look at the steps below: 

How to Winterize a Pontoon Boat

1. First, consult your boat’s manual to make note of any specific instructions provided.
2. Next, connect the boat motor to a water source.
3. Fill the tank with gas, and pour in a stabilizer. 
4. Replace the gear oil.
5. Add fogging oil to the carburetor—if your boat’s manual calls for it. 
6. Change out the sparkplugs.
7. Clean the boat’s exterior thoroughly. 
8. Disconnect the battery and any other electronic elements.
9. Cover the boat with a tarp or other substantial protective material. 

How to Winterize Your Ski Boat

1. Add a fuel stabilizer to the fuel tank.
2. Add fogging oil to the carburetor—if your boat’s manual calls for it. 
3. Drain any excess water.
4. Loosen the belts.
5. Remove the drain plugs.
6. Disconnect the battery.
7. Clean the boat’s exterior thoroughly.
8. Pour antifreeze into the plumbing system to prevent the pipes from freezing, expanding, and possibly bursting. 

3 Common Boat Winterization FAQs

If you’ve never winterized a boat before, you probably have some questions about how to complete the process effectively and easily. Check out this list of common boat winterization questions we receive from customers and our answers to them:

What tools or products do I need to winterize my boat?

• Spot remover
• Marine cleaning agent
• Vacuum
• Degreaser
• Soft and hard brushes
• PVA towel
• Water hose with a nozzle
• Wax 

How often should I winterize my boat?

How often you need to winterize your boat depends on what type of boat it is, its size, the outside elements, and where it’s located. As a general rule, you should take these steps either monthly, quarterly, annually, or every two to three years:

Trust the Boat Winterization Experts at CleanTools

If you’re looking to winterize your boat this winter, CleanTools has the products to help keep it in tip-top shape all year long. Our superior boat cleaning supplies will protect your boat from water damage, frozen pipes, dirt and grime, and everything in between. Our PVA cloth—appropriately called the Absorber —allows you to dry your boat faster and easier than ever before. It keeps your boat cleaner and dryer than any other product on the market. For quality boat winterization tips and products near you, try CleanTools. If you need a gift idea for the holidays we've got your back.

Contact us today.

You may think that changes in weather indicate the end of the boating season—it does not. In fact, it’s just the opposite. Cooler temperatures and fewer vessels on the water create an ideal atmosphere for boating in the fall, the sailor can hit the water with their glistening crafts.

The reasons for love fall boating are crisp air and gorgeous fall hues make sailing the open waters much more fun than doing so on sweltering hot days. The fall season does, however, indicate shorter days and ice-cold water. To help you stay prepared, let’s discuss everything you need to know about boating in the fall.

Things to Do in the Fall on a Boat

If you’re new to boating, or typically boat only in the summer months, you’re in for a treat. There are so many fun activities to do on your craft in the fall. 

1. Stern-gating

Stern-gating is the younger, more adventurous sibling of tail-gating. Instead of driving to a crowded parking lot, invite your friends and other boat enthusiasts for an afternoon of food and fun on your boat. Though you can stern-gate anywhere, it’s definitely more fun when your favorite baseball and football team’s stadium is near the water. 

2. Fall Festivals

There’s nothing like a festival to put you in the mood for all things fall. Pack up your boat and travel down the river to your town’s local fall festival or state fair. 

It’ll be chilly on the water, so grab a hot cup of your favorite pumpkin spice beverage and get your cruise on. If you do plan to travel your city by boat, be sure the waterways have proper boat accommodations and facilities. 

3. Boat Camping

Who says you need a campground to experience the peace and serenity of nature? One of the best activities boat owners can do is go boat-camping. Find a quiet place to cruise, pitch a tent on the deck, and anchor out. 

With boat camping, you can avoid crowded campsites, bond with friends and family, and have a new experience. Don’t miss out on the smores! Prep them beforehand and pop them in a convection oven for ooey-gooey goodness. 

Boating Tips For The Fall Season

When fall boating, keep your friends and family safe with the following recommendations.

1. Wear a PFD.  If you plan on entering the water, always wear a personal flotation device. Doing so protects you from the shock of cold water.
2. Mind the weather.  Autumn weather is dangerously unpredictable, especially on a boat. Before you go boating, check the day’s weather and prepare for wind, heavy rain, and storms.
3. Communicate.  Before your excursion, let someone know where you’re going and when you’ll be back. Do this every time you boat, not just in the fall.
4. Turn on the lights. When boating in the fall, lights are always your friend. Make sure you have navigational lighting that works, as well as waterproof flashlights and headlamps. 
5. Clean your vessel. After every adventure, be sure to rinse your boat and dry thoroughly with a PVA towel like the Absorber® XL . With this efficient tool, you can spend less time drying your boat and more time enjoying life.

Don’t Forget About Boat Maintenance In The Fall

Keep your craft in optimal condition with regular washes and waxes, as well as a complete rinse after every outing. With a soft and durable PVA cloth material like  The Absorber® you can carefully dry every surface—inside and out. The Absorber® is a multi-purpose tool every fall boat enthusiast needs. Prevent salt damage and corrosion with a machine-washable cloth that’s essential when boating in the fall.

Every boat enthusiast knows how important it is to keep a boat in optimal condition. With scorching temperatures and unrelenting sunshine, your vessel needs adequate protection from the sun. Don’t fret just yet. A major component of sun-protective boat care requires  little to no effort  on your part! Sound too good to be true? It’s not. 

If you’re not sure how to protect your boat from the sun, stick around and we’ll show you exactly how it’s done. 

Areas of Your Boat That Can Be Damaged by the Sun 

Most boat owners only consider protection for the exterior of their boats. This is a major no-no. Sun damage impacts potentially every aspect of your craft:

• Dulls Gelcoat
• Cracks exterior surface
• Damages vinyl seats
• Wears internal components

If you’re in an area that reaches extreme temperatures, do your best to keep your boat protected from the elements. Repairing or replacing your boat’s damaged components can be time-consuming and costly if you aren't using the best boat cleaning products!

How To Protect Your Boat’s Finish From Sun Rays

Want to know the most popular way boat owners protect their vessel’s finish from the sun? You guessed it—boat wax. Boat wax helps the Gelcoat or exterior surface stay intact. It also makes your vessel sparkle like new. 

Search for the type of wax that gives your boat the protection and glossy finish you’re looking for and apply as needed. When your boat has a nice, even finish post-adventure cleaning is easy-peasy. Use a high-quality PVA cloth like The Absorber® to remove grime and dirt that may have been attached during your outing. The Absorber® dries both interior and exterior surfaces in a fraction of the time but with twice as much care. 

How To Protect Boat Seats From Sun Rays

Although wax is a major key to UV ray boat protection, your vessel needs more. We’re not saying don’t wax your boat. In fact, it’s just the opposite: wax your craft with the finest possible solution as boat UV protection. But when your boat is docked, keep it in a covered area.

No Shade? No Problem

As a general rule, we recommend full-body boat covers. They come in all sizes, styles, and shapes to accommodate a series of vessels. This will help save time when cleaning your boat's interior.

Full-Body Cover Prevents

• Mold
• Dirt
• Animals
• UV rays
• Rain 

If your boat is stored indoors or under a shade, consider using marine upholstery protectant to prevent seats from fading and wearing down.

Don’t Forget—Protect Yourself From UV Exposure

A boat isn’t the only thing that should be protected from UV rays. When the temperatures soar, be sure to protect yourself and your loved ones from overexposure to the sun’s rays. 

Excessive sun may cause:

• Painful sunburns
• Cataracts
• Premature aging
• Skin cancer

To help prevent these conditions when boating, we’ve listed a few tips to keep you having fun:

• Apply sunscreen
• Wear sunglasses
• Sit in the shade when possible
• Wear light-colored long-sleeved shirts and long pants
• Bring a bucket or wide-brimmed hat
• Check UV index
• Avoid boating in high altitude

Don’t Forget to Wipe Your Boat Down!

After a long day out in the sun, boat maintenance isn’t exactly what you want to do. Trust us, we’ve been there. However, it helps ensure your craft is ready for the next adventure. Use the best boat cleaning products for a quick clean. Keep a durable, yet soft cloth made with PVA material like  The Absorber® stored on deck. It’s a must-have tool for every boat owner. Not only does  The Absorber® thoroughly dry every surface of your boat with care, but it’s also machine washable! Just toss it in the wash after using it.  The Absorber® makes daunting boat maintenance a breeze. 

Owning a boat is easy. Maintaining a boat is not. However, boat ownership is worth it. If you’ve been a bit lax when it comes to cleaning and maintenance, we’re here to help. Our vessel connoisseurs have put together a boat detailing checklist. This guide to boat detailing inside and out was crafted to help novice and experienced boat owners. Here we will cover everything you need to know about boat detailing and boat detailing supplies. Check out our list and see if there’s something you haven’t done in a while.

Is Boat Detailing Really Necessary? 

There’s more to boat detailing than aesthetics. While regular cleaning helps your boat look good inside and out, it also ensures functionality and longevity. When out on the water, your boat is exposed to conditions that can cause significant damage. To help boat owners maintain their crafts long-term, we’ve gathered the ultimate boat detailing checklist. 

Below, we’ll discuss everything boat owners need to know about boat washing and detailing. 

Boat Detailing Products

When it comes to boat cleaning and detailing, the right boat detailing tools tend to make all the difference. Listed below are the boat detailing products every craft owner needs to have for an excellent boat inside and out. Add these tools to your boat detailing kit and simplify your boat detailing process.

Essential Tools for Boat Detailing

Spot Remover

Improve the appearance of your boat and get rid of stains and streaks with a hard water spot remover. 

Marine Cleaning Agent

Never apply household cleaners to your boat. Using high-quality cleaning solutions specifically formulated for marine vessels will protect your boat from damage.

Vacuum

Keep the interior carpet clean and free of dust mites with a lightweight vacuum cleaner. An attachable nozzle will extract dirt from tight spaces. 

Degreaser

A degreaser will effectively and efficiently eliminate grime and grease build-up in your engine bay.

Soft & Hard Brushes

You’ll need a variety of brushes with long and short handles to services the multiple areas throughout your vessel. 

PVA Towel

Made from non-abrasive material called Poly Vinyl Alcohol, The Absorber® is an ideal drying solution for a variety of surfaces including boats, cars, and windows. Cleanse any surface without impacting the finish. 

Water Hose w/ Nozzle

A spray nozzle will help you efficiently eliminate dirt and other contaminants from hard-to-reach areas.

Wax

Apply boat wax on the hull of your craft in a circular motion. This gives your boat a beautiful shine and prevents gel coat finishes from oxidation.

Top 3 Tips for Boat Detailing

Once you have all the arsenal of boat cleaning supplies, follow these steps for boat detailing and make your vessel last longer!

1. Remove Salt Water Residue

Flush your boat engine and exterior after sailing in salt water. Residual salt can cause components to rust and erode. 

2. Cover Your Boat

When storing your craft outdoors, long-term, or in winter months, cover with a waterproof-, tear-, and puncture-proof material to protect from animals, weather damage, and dirty contaminants. 

3. Use Environmentally-Friendly Soap

Clean the hull of your boat with a long-handle brush and biodegradable soap that removes oil and algae. 

How Often Should You Detail Your Craft?

Whether you’re personally detailing your craft, or paying for a professional service, the following factors impact the frequency and cost of boat maintenance:

• Craft type
• Craft size
• Elements
• Location
  

Maintain your vessel with a boat detailing checklist organized by frequency of tasks. 

Monthly

• Wash exterior (rinse, wash, rinse method)
• Empty waste tank
• Check bilge pump function
• Confirm fluid levels
• Coolant 
• Engine oil
• Transmission oil

Quarterly

• Wax Gelcoat 
• Replace boat zincs
• Scrub bottom of the hull

Annually

• Change fluids
• Top to bottom inspection
• Clean water tank storage
• Wash and waterproof canvas
• US Coast Guard safety check 

2 to 3 Years 

• Repaint hull
• Inspect water seals
• Balance propeller shafts
• Additional maintenance

If you’re a boater, there’s nothing better than taking your vessels out on the water. However, maintaining a boat requires regular maintenance. This not-so-enjoyable aspect of boat ownership is essential to keeping your watercraft beautiful and functional. If you’re new to boat ownership and don’t know the best way to keep it in premium condition and wonder what supplies do i need for my new boat, don’t worry. We’ve listed essential boating supplies for every owner below. 

Boating Supplies Every Owner Needs

Cleaning Supplies

Below is a complete list of the best boat cleaning supplies and yacht supplies that you will need to keep your boat in premium condition.

Soft & Hard Brushes

The right brush will make cleaning your boat a breeze. Although you can get by with only one brush, it’s best to have at least two boat brushes. Soft brushes that protect gel coating will be your source for everyday grime. To tackle aggressive surfaces on your boat, choose a brush with strong bristles. 

Polishes & Conditioners

Polish your craft with the proper protective treatment habitually. Refinish dull-looking fiberglass and prevent oxidation with Gelcoat, polishes, or waxes. Protect the interior and exterior leather and vinyl furniture with a UV protectant product that leaves a glossy finish. 

Cleaners & Mildew Removers

To adequately maintain your boat’s cleanliness, you may need a series of cleaning solutions. Prevent your vessel’s exterior from weathering and corrosion with a restorative polish and mold and mildew remover. While multifunctional products are most popular among boaters, be sure the products you use are appropriate for the surface you’re using them on. 

Maintenance Supplies

Repair Tools

Eventually, you’ll need to make impromptu mechanical adjustments to your vessel. To prepare for this, review a few maintenance videos and have a small toolbox of boating supplies. This includes pliers, a screwdriver, and a wrench. 

The Absorber®

After making repairs, wipe down surfaces with The Absorber® multipurpose towels. With a variety of sizes, this product will effectively maintain your boat. After use, simply wash and store your Absorbers® in your maintenance and cleaning supplies for next time. 

Maintenance Checklist

Before every excursion, make sure everything on your maintenance checklist is in working condition.

• Confirm oil reservoirs are full
• Check bilge and hoses for leaks 
• Check the water coolant level
• Monitor oil pressure and voltmeters

Safety Supplies

Flotation Devices

An essential item you need to have on your boat is a flotation device. Ideally, each passenger on your vessel should have their own flotation device, which can also double as seat cushions. You’ll also want a lifesaver, life jackets, as well as flotation gear for a group of people. 

Barrels of Fuel 

Make sure you’re never stranded in the water by preparing for unforeseen boating circumstances. Keeping extra barrels of fuel will come in handy should you get lost or run out of fuel.

Flare Guns

Boaters are legally obligated to have a Coast Guard-approved signal that can be detected both night and day. In case of emergency, a flare gun or other visual distress signal will come in handy. Your boat should have at least two flare kits.

Storing Your Boat

How you store and maintain your boat will ultimately depend on your location and the vessel’s size. Weeks of inactivity or the winter months can lead to storing your boat for long periods of time. Let’s learn more about each method. 

Storage on the Water

This may be a practical solution for boaters with large vessels or de-icers that’ll protect their boats from ice buildup. Alternatively, you may want to keep your boat on the water if you plan on boating year-round. Keep in mind, year-round salt and sun exposure may damage your boat’s finish and lead to barnacles growing on the hull.

Indoor Storage

Storing boats in a garage, shed, or large indoor space will protect them from bad weather, harsh sun rays, and deterioration. This is a popular option for boaters who live in the south and are susceptible to unforgiving hurricanes. If you’re searching for a large space, consider renting a storage unit. 

Dry Stacking

If you opt for outdoor storage, your powerboat will likely be dry stacked. In this method, your boat is lifted by a crane and placed on vertical racks. Outdoor, dry-stacked storage prevents deterioration of the bottom of the boat. It’s also thought to be safe from theft or damage from vandals.

Interested in purchasing a new boat? Or maybe you were invited to go boating with a friend? It probably comes as no surprise to hear that boats on lakes, rivers, or the ocean can look and operate completely different from one another. Take a look at some of the pros and cons of each boating experience, so you know exactly what to expect from a lake and ocean boat.

Boats on Lakes

Usually, you’ll see ski boats, jet skis, rowboats, canoes, kayaks, and other small open fishing boats on lakes. This is so they can easily be pulled in and out of the water using a trailer. You will enjoy the fresh water boating in lakes, leaving no harsh residue in your boats.

Pros

Lake boating can be laid-back when you’re fishing and riding gentle waves or exciting with the options of swimming, watersports, and other activities. Freshwater leaves no salt build-up on your boat either. It means less cleaning on your part.

Cons

A lot of people go boating on lakes. Because of this, it can be crowded—especially during seasonal boating periods. These seasons most likely occur because of the presence of ice or low water levels. Additionally, it’s harder to make use of the good times without a lakeshore property.

Boats on Rivers

Large riverboats come with a flat bottom to avoid damage in shallow areas. Small riverboats, such as kayaks, canoes, and whitewater rafts, are made to run aground so you can venture out of the vessel and explore. Some even come with motors to make getting back on the water easy afterward.

Pros

In certain areas, boats on rivers get cool boating traffic amenities to operate as land street systems do. This includes riverwalk restaurants, fuel stations, docks, and more. You may even spot local wildlife that isn’t typically witnessed in highly populated areas. The shallowness in some places means that the river can warm up and become a great spot for swimming or beginners trying out watersports.

Cons

Since rivers are smaller than lakes and oceans, the boats can’t be all that big. Not only that, but you’ll need a boat with a strong motor to overcome the river current in certain situations. River boating also requires constant vigilance as debris from the trees and other plants surrounding the edges can fall in. Your time and distance traveled on a river can be limited by the boating season or vegetation.

Boats in Oceans

When it comes to seawater, generally speaking, sailboats are your best bet. They can propel themselves to travel without constant fueling and can be manufactured to slice through harsh waves for safer travels. Keep in mind that the bigger the sailboat, the larger of a crew you’re going to need to keep it running. While, in comparison of lake boat vs ocean boat, ocean boats are difficult to move out from water in emergency times.

Pros

Thanks to oceanic boating, you can see beautiful tropical fish and other creatures. You can also visit different terrains, such as islands, beaches, and mountains, as a way to discover new places. And lucky for all boats in the ocean, the saltwater doesn’t freeze easily, so you can go all year round.

Cons

The hardest part about taking out boats in the ocean is just how vast it is. So, boating in the ocean is a difficult part during bad weather situations. The farther out you go, the harder it is for emergency response teams to reach you in times of trouble. Sea weather can be harsh too. Although you wouldn’t go boating during a hurricane, giant crashing waves during storms can be hazardous.

Keep Your Boat In Tip-Top Shape In Any Body of Water

At the end of the day, it doesn’t really matter where you boat… just that you clean your boat properly afterward! Ensure your haul lasts for years to come with these premium cleaning accessories , Then, you can give it the ultimate drying experience with The Absorber® . This is a super-drying PVA towel that soaks up and holds water better than anything out there today.

Save time cleaning up after your ride with large-sized towels such as The Absorber® XXL (20in. x 32in.) or The Absorber® MAX (22in. x 43in.). You can even bring a small, spare The Absorber® to cool yourself off while you prepare for the next trip out.

One of the most annoying enemies of boat lovers everywhere is none other than fouling. This is when tiny marine plants and animals attach themselves to any boat parts that sit underwater for a long time, such as the hull. For this reason—while it’s not an exact science—the answer to “how often do you have to wash the hull of a boat?” 

When is the best time to clean your boat hull?

Every 4 to 12 weeks you should be cleaning your boat's hull!

We know the time frame between boat cleanings can be anywhere from small to huge! That’s because several factors affect how dirty your boat gets. You also have to consider that, when you do decide to clean it, you don’t want to wait until you have to use industrial-strength chemicals or soaps to get all the grime off. Not only is it unnecessarily tiring and time-consuming, but a lot of marinas no longer allow the use of strong cleaning products to protect the region’s water ecosystem.

Factors That Affect Vessel Hull Cleaning Process

For the most part, how often you wash a boat hull depends on whether your boat has a slip, operates in saltwater, fouling, and how often it is out on the water. Also, you need to follow the right approach how to clean a boat hull for removing all foul stains.

Fouling

Fouling is when plants and algae or any sort of marine life accumulate on the hull of your boat. This fouling process happens due to location, the temperature of the water, and even the salinity levels of the water. 

Water Salinity

Every time you boat around in saltwater: the best way to clean a boat hull is to wash your boat as soon as you return to the dock. It has to be with a cleaning agent too! This is because simply hosing it off won’t cut through the sticky salt left behind. Otherwise, the salt builds up on the hull and leaves water spots in your windows that never come out! If you can’t give your boat hull a full cleaning after a salty ride, that’s okay. However, you should take a little time to wash and dry the windows so they stand the test of time.

Weather Protection

If your boat has a slipcover, you can wash it less often. That’s because, rather than rain droplets, you’ll only be taking care of any dust and debris that got in. That being said, you should still clean off your boat immediately following any rides, so you’re leaving it in good shape when you cover it up. You won’t want it to permanently stain if the gel coating or wax layer has thinned out. As long as you’re washing the boat hull at least every eight weeks, you shouldn’t need much more than a standard cleaning and waxing.

If your boat doesn't have a slipcover, you should wash your boat hull as often as every three or four weeks—maybe even sooner if your wax layer is wearing off, so water streaks, bird droppings, and other stains don’t leave behind an unsightly mark.

Boat Usage

The frequency, duration, and speed you use when boating can make a huge difference in how dirty your boat gets. Boats that aren’t used very often are going to quickly get covered in fouling. This is also the case for boats that are only taken out for short, slow rides. By boating more frequently, longer, and quicker, you’ll slow down the growth of fouling as you have fun! Minimizing the time needed to clean your boat hull yourself.

The trade-off is you’ll need to do more basic washes after each of these rides. However, since they’ll be menial, it shouldn’t be anything a boat lover like yourself can’t handle!

Your Secret Weapon For A Clean Boat Hull

After gently scrubbing down the hull and windows of your boat with a convenient wash mitt , you’re going to need a drying towel that effectively absorbs every last drop of water, so no stains are left behind. When it comes to your boat, opt for nothing less than The Absorber® . This boat towel is made out of a PVA material that allows it to super dry any surface. This way, you can get the cleaning job done better and faster. Best of all, it’s chemical-resistant and machine-washable, so you can use it over and over again for years to come. 

Check out our full collection  for even more vessel cleaning tools, wash mitts, and more to help keep your boat hull in tip-top shape. Trust us—life’s better on a clean boat!

Buying a boat secondhand can be a great way to find a quality vessel at a more affordable cost. But, to land a worthwhile deal, you’re going to have to give it a test run and proper inspection. This way, you can easily spot the following widespread boat problems and know how to buy a used boat. If you’re unsure of where your standards need to be, ask a knowledgeable friend or mechanic to come along!

Compromised Engine Before You Say Yes: Complete These Used Boat Maintenance Checks

Come 15 minutes early to your test ride so you can pull the dipstick and check the oil before the seller can try warming it up. Look to see if the oil looks milky, which means water is present, or if carbon coats the plugs. Listen to your engine before and during the trial run to ensure it’s running smoothly. Learn below the things to check when buying a used boat from the seller.

Malfunctioning Pumps

Manually trigger the bilge pumps as well as other features supported by pumps such as washdowns or heads. This is because, even if you flip a switch to check a pump and it doesn’t respond, the float switch itself could otherwise be where the issue lies.

Faulty Electric System

Turn on all electrical switches and features one-by-one and all together while conducting your water trial. See if the wiring looks different at the fuse box and verify what electrical replacements took place and if they’ve been corrected. Keep an eye on the wiring as a whole and assert whether it looks organized too.

Wood Rot

If you’re considering purchasing an old wooden boat, you may see rot on untreated wood pieces. This usually comes in the form of large cracking around the edges of the transom. You might even notice rot as you walk across a seemingly spongey, bouncy deck.

Waterlogged Foam

Have the seller remove the heavier equipment from the ship and pay attention to whether your boat floats evenly and if the scuppers rest high above the waterline. If possible, bring a moisture meter and mallet on board to tap the corded areas of the boat you think may contain water: they’ll sound different than dry ones.

Stringer and Joint Separations

Concerning the boat’s mainstay, take a well-lit survey of the stringers to note damage or splitting from the hull. You can tell whether the hull-to-deck joint is separated from the ship if the rub rail is bent or broken. You’ll know the sealing is separated if you soak it all with a hose and water comes out around or in the bilge.

Cabin and Lower Unit Leaks

Spray a hose all along the boat and watch out for watermarks, or hatch, port, and seam leaks. If left unresolved, these leaks could lead to lower boat problems, such as milky lower unit oil. You can ask the seller to replace the lower unit oil yourself before agreeing to buy to know for sure.

Dirty Surfaces

Finally, it’ll be much easier to know what kind of boat maintenance is needed once you spruce it up with some cleaning. We highly suggest using The Absorber® drying towel. Its PVA material isn’t only super absorbent but also soft and non-abrasive to protect your new (used) boat. It’s even chemical-resistant and machine-washable to last you for years.

Visit here for more cleaning products to make the used boat yours. After all, life’s better on a clean boat!